Gulfstar 44 MK II image

Gulfstar 44 MK II

Location Atlantic Beach, Florida. Get contact data at BoatShop24
$123,939
Request survey for $747
Beam
4.01m
Cabins
2
Class
Cutter rigged sailing boats
Dry Weight
11,793kg
Engine Hours
4250
Engine Make
Perkins
Engine Model
4.154M
Engine Type
Inboard
Fresh Water Tank
541.31 l ()
Fuel Tank
302.83 l ()
Fuel Type
Diesel
HIN
GFS44077M84E
Holding Tank
Hull Material
Fiberglass
Length
13.41m
Length Overall
13.41m
Length at Waterline
10.8m
Make
Gulfstar
Max Bridge Clearance
17.07m
Model
44 MK II
Offered By
Pop Yachts
Single Berths
4
Year
1984
Stock #299579

Only 80 photos available on this website. See all 266 photos at www [dot] popyachts [dot] com/view/299579

Reason for selling is "Not using".


ANY and ALL offers will be put in front of our seller! Submit your offer today!


Tons of Updates!! Great Raymarine Electronics w/Auto Pilot and Radar!! Set Up for Single Handed Sailing!! Dinghy w/4 Stroke OB!! Must Be Seen!!

If you are looking for a quality cruising sailboat that you can buy today and head to the Bahamas tomorrow, this 1984 Gulfstar 44 MK II is just the boat for you.

This one is in great condition with all the "bells and whistles" you want and need to make this Gulfstar a very capable sailing vessel and also the creature comforts necessary to make extended stays aboard both comfortable and convenient.

Below there are two large cabins, fore, and aft, with an attached head for each. The aft head includes a separate shower stall. Additionally, there are sleeping berths in the salon for three extra guests.

The salon is spacious with an L-shaped settee to port and a straight settee to starboard. A folding table between them provides a lot of meal-time space.

The galley includes a gimbaled stove/oven, a microwave oven, an in-counter refrigerator/freezer combo, and a double well stainless steel sink with both fresh water and raw water access. There is lots of storage and counter space, and a glass tile backsplash.

There is a large nav station that includes a Raymarine Axiom 12 MFD(includes radar), a Standard Horizon Matrix AIS VHF radio, and a Fusion stereo system with speakers in the salon and the cockpit.

Climate control below is provided by a Taylor Made 16,000 BTU air conditioner with reverse air heat. Additionally, there are plenty of portlights and hatches to catch the cool Caribbean breezes.

When not under sail the boat is powered by a 66 HP Perkins 4.154M diesel engine with 4250 hrs pushing a ZF direct drive transmission.

Off-grid electrical power is provided by an Onan 4.0MDKC generator with currently 3196 hrs. Additionally, there is an Air Breeze 12 V/25Amp/105 W wind generator.

Electric storage includes 2 Duracell group 27 batteries, 2 Napa group 24 batteries, and 2 West Marine batteries forward for the bow thruster.

There are curtains for the portlights, and all upholstery - both below and in the cockpit - appears to be in "like-new condition with no signs of tears or stains.

Moving topside, the cockpit is very spacious and the full enclosure with roll-up isinglass windows provides great protection from inclement weather and great ventilation with the windows rolled up. There is plenty of seating and the cushions are thick and comfortable. There are two stereo speakers connected to the Fusion stereo below.

The helm is conveniently laid out with switches to starboard, analog gauges to port, and navigational electronics up to eye level. These include a Raymarine Axiom 12 MFD including Raymarine Quantum 2 Doppler radar, Raymarine EV100 autopilot, and controls for the SidePower SE 100/185T bow thruster. Also included at the helm is a Danforth 5" liquid-filled magnetic compass.

Moving aft, the poop deck is large with a large lazarette. Above the stern is a davit/dinghy lift carrying the 2020 Zodiac Cadet 330 10'4" RIB tender. The Yamaha 9.9 HP 4-stroke outboard is mounted to the rail. The outboard has its own winch lift.

Moving forward, the standing rigging includes an extruded aluminum, keel step mast with internal support, double spreader main mast, and external ProFurl roller furler. The boom is extruded aluminum with cast aluminum gooseneck. There are stainless steel, 1x19 braided stainless steel main stays diameter with 5/8" turnbuckles. There is a ProFurl roller furler, 1/19 braided stainless steel fore stay with 3/4" turnbuckle, and stainless steel, 1x19 braided steel backstay with 5/8" turnbuckle. There are also two stainless steel, additional support shrouds with removable turnbuckles for spinnaker set-up.

There are two Barient 22 2-speed winches and one Barient 21 2-speed winch at the mast. Cockpit winches include two Barient 32, 2-speed, self-tailing, one Barient 23, 2-speed, self-tailing, and two Barient 22-39, 2-speed, self-tailing.

The sail inventory includes one Irish Sail Lady main sail (hung) in above-average condition, one almost new 150% genoa (hung), one 110% genoa (stored below), and one spinnaker sail (stored below), and one storm sail (stored below).

Ground tackle includes an Ideal vertical, 12vDC windlass with gypsy and capstan, mounted on the bow with deck control (retrieve only). There is one CQR 60# galvanized, hinged plow anchor affixed to a galvanized chain rode (length unknown), utilizing stainless steel and galvanized shackles. There is also a CQR 45# galvanized, hinged plow anchor affixed to galvanized chain and rope rode (length unknown) utilizing stainless steel and galvanized shackles. Additionally, there is a Fortress aluminum, fluke anchor stored in the lazarette.

While we will always attempt to provide you with a TRUE representation of every vessel we market, during any purchase from Pop you will be encouraged to schedule an inspection from an independent, accredited surveyor and every purchase WILL ALWAYS BE subject to your satisfaction with the results from your independent survey and your own personal trial run.

We have several more Morgan, Hunter, and CSY vessels for sale. If you're in the Jacksonville, Palatka, Palm Coast, or Fruit Cove areas, please use the form on this page to let me know what you're looking for and I'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.

You have questions? We have answers. Call us at (941) 914-9217 to discuss this vessel today.

$

currency selector