Beneteau First 27 -21 / Tohatsu F9,9 - Sparsamt använd image

Beneteau First 27 -21 / Tohatsu F9,9 - Sparsamt använd

Location Ängelholm. Get contact data at Blocket
$117,500
Request survey for $458
En otrolig snabbseglad fullutrustad segelbåt i absolut toppskick, mycket sparsamt använd och full utrustad. En ägare sedan ny och årligen omhändertagen av varv / inomhusförvarad. Legat i bräckt vatten. En utrustningslista som skall ses. Nypris + 1.700.000:-. OBS ! bilderna från havet är från nätet - ej denna båt

ARCHITECTS/DESIGNERS 
• Naval Architect: Manuard YD
• Outside & interior design: GIGODESIGN

EC CERTIFICATION
• Category B - 6 people
• Category C - 8 people

STANDARD SAIL LAYOUT AND AREA
• Hull length:   7,99 m
• Beam:   2,54 m
• Light displacement:   1.400 kg
• Maximum draft:
- with keel down:   2,0 m
- with keel up:    0,95 m
• Keel weight:    610kg 
• Mast height (carbon fibre)
(from the deck):    10,90 m 
• Air draft:    12,20 m
• Height of boat on trailer:    2,40 m
- Without the mast:    2,25 m
• Length on trailer:    11,50 m
- Without the mast:    9,50 m
• Boom (carbon fibre): 3,5 m
• Retractable bowsprit (carbon fibre):    1,5 m
• Unsinkable volume:   3 m³
• Maximum engine power (optional
engine):    10 HP
• Mainsail:    28 m² 
• Jib:    21m² 
• Asymmetric spinnaker:  80 m² 

STANDARD EQUIPMENT

CONSTRUCTION 
• Design in accordance with European Directive requirements and
according to CE certification
• Hull and deck in vacuum-infused vinylester resin, and polyester
sandwich with multi-axial unidirectional lamination
• Reinforced infused polyester hull in keel and bow parts
• Moulded deck with anti-slip surface
• 2 Transom hung polyester sandwich rudders
• White gel coat

KEEL CONFIGURATION
• Lifting keel made of lead, cast iron and polyester epoxy composite
• Hydraulic manual keel lifting pump

DECK EQUIPMENT
• Fore and aft pulpits 60 cm with 6 stanchions and wires
• Forward and aft stainless steel mooring cleats
• Stainless steel chainplates for shrouds and forestay
• 1 Opening deck hatch for access to the head (580 x 580 mm)
• 1 Opening panel for access and ventilation of the cabin (255 x 255 mm)
• 1 Mainsail traveller with cleats
• 9 Halyard and sheet blockers
• Composite tiller, carbon look + Stick
• 2 Rope bags + 2 Crank bags
• Manual bilge pump
• 2 Hull portholes
• Mooring locker
• Compartment for outboard engine in cockpit bottom with 2 top covers, 1
lower cover and engine mounting
• Aft locker
• Swimming ladder

WINCHES
• 2 Harken STA15 winches for halyards
• 2 Harken STA20 primary winches

MAST AND RIGGING
• Mast and boom made of carbon fibre; mast with 2 set of spreaders
• UV protection on carbon parts
• 19:1 continuous standing rigging and turnbuckles
• Reef and kicker with 8:1 pulley sets built into the boom
• Retractable bowsprit. Manoeuvres from the cockpit
• 1 Mainsheet with ball bearing pulleys
• 16:1 kicker
• Jib sheets
• 1 Mainsail halyard Spectra 2:1
• 1 Spectra jib halyard
• 1 Spectra foresail halyard
• 1 Mast head gennaker halyard
• 1 Split gennaker halyard
• 3 Reefing lines
• Asymmetric spinnaker sheets
• 1 Cunningham
• 2 Jib altitude settings
• 2 Jib sheet in-haulers
• Mainsail traveller adju...

$

currency selector