Ocean Cruiser 45 - Arne Borghegn

One-owner Ocean Cruiser "QATTOQ", built in steel, ready for the big oceans - designed to handle all conditions. The ship can be compared to Motiva - it is the same constructor. "QATTOQ" is always looked after according to all regulations and continuously updated, ready for sailing on the world's oceans or as the perfect houseboat. There is a lot of space for storing equipment and provisions. The hull is fully insulated, and a central heating system is installed throughout the ship.

 

Layout:
Large saloon with sofa arrangement, well-equipped pantry and card table. From the saloon there is access to a toilet with sink and hand shower - and from there access to the master cabin aft with a large double bed and a children's bunk. In the bow you will find a guest cabin with a double bed and a cabin with 2 bunk beds on the starboard side.

 

In general for the boat, whether sheltered or on deck, is that you always have the opportunity to grab hold of something that is safe to hold on to. There is stowage space under all bunks, sofas and seats.

 

Here you get a lot of ship for a small budget, and a lot of equipment and almost new sails are included.

Please contact Yachtbasen to arrange a viewing.

 


QATTOQ data:
Model: Ocean Cruiser 45
Length: 13.42 m
Width: 4.06 m (ship register 4.07)
Draft: 2.30 (depth register 3.43 m)
Displacement kwl: 16,000 kg.
Keel weight lead: 5,500 kg.
Built with both frames and stringers with 400 mm. Space (very strong construction).
Insulation: Foam approx. 100 mm.

 

Sail guidance / Rig:
Mainsail, (Sejlmagener Egå): 47.8 m2, continuous sail poles and Lazy Jack & sail bag
Furlex Genua furling foresail (Sejlmager Egå): Approx. 74.80 m2
Cleavers (Greensails): 27.4 m2
Stag jib (Greensails): 23.9 m2
Player (double cloth) with fiberglass stocking: approx. 150 - 175 m2
Genakker Momentum Aspin AR - Size 10 - 115.5 m2 (NEW):
Mast: Selden
Player status: Selden
Water screws: Bronze & Stainless
Game:
2 pcs. Andersen 56 Self Tailing RF Steel
5 pieces. Andersen 46 Self Tailing RF Steel
2 pcs. Andersen 28 Self Tailing RF Steel

 

Navigation etc.:
Autopilot Autohelm ST7000
Chart plotter: Garmin GPSMAP 720
GPS: Philips BPN1 with repeater
VHF: Sailor Compact RT2047
Radar: Furuno model 1720
Log: DanaPlus 2000 (New Raymarine i40 log, never fitted included)
Sonar: DanaPlus 2000 (New Raymarine i40 sonar, never installed included)

 

Technical installations:
Lewmar windlass with 50 m. galvanized chain.
Stern windlass Lewmar with lead rope (fitted but not connected, never used)
Wind generator: Air 40
Diesel tank: Tank in fridge approx. 1,500 l.
Water tank: Approx. 400 l.

 

Interior design:
Front cabin: 2 pcs. bunks (2 x 200x65)
Spacious salon with long sided sofa & U-shaped sofa
Card table with seating & JVC radio
Pantry with VOSS gas stove with solenoid valve, sink fitting, etc.
Cooler box: Isotherm evaporator with Danfoss compressor
Plenty of cupboard space / coffin benches and space under the door
Hot water tank (Landstrøm or v. Motor operation).
Central heating with radiators throughout ships Reflex 60/61M (diesel)
Starboard cabin 2 berths (200x75 & 200x65)
Toilet with shower, hand basin hot/cold water and holding tank.
Large aft cabin with double bed (200x145) and cot (200x65)

 

Engine:
Volvo Penta TMD 30 A - 84 Hp
Gear: Volvo Penta MS3C
Propeller: Autoprop 3-blade

 

Miscellaneous:
2 sets of sailing clothes MUSTP HPX size S & XL
Life jackets i.a. Zodiac inflatable Cruiser 150, children's life jackets, & adult life jackets.
Davids integrated in search countries

 

Spare parts, etc.
Many spare parts, e.g. complete gear.
Impellers, gaskets, thermostats, etc.
Base paint approx. 30 - 50 l.
Extra teak wood for retrofitting, conversion
Lots of rope work, e.g. new.
100 m. new mooring
Approx. 200 m. mooring i.a. new

 

Papers, etc.:
Owner's mortgage deed of DKK 300,000
Registration ship register (XP5757)
Danish Nationality Certificate
Letter of measurement
Customs bill
Manuals etc. for almost everything