A superb cruiser/racer in great condition, recently antifouled and regularly maintained by a fastidious owner. From the board of internationally recognised New Zealand yacht designer Ron Holland, this boat is a must see for those seeking a well-equipped, fast and comfortable ocean-going yacht. Has a current marine survey certificate from South African Maritime Safety Authority (SAMSA), with no issues reported.
Model/Brand: Ron Holland
Type: Sloop rig with a running cutter stay
Length LOA: 14.32m
Length LWL: 11.45m
Beam: 4,3m
Draft: 2.1m
Berths total: 6
Designer: Ron Holland
Builder: Magnum Boat Builders
Launched: 2006
Last Refit: June 2017
Mooring included: No
Propulsion:
Num. of engines: 1
Engine type: Vetus
Power per engine: 65hp
Cooling: Fresh water and raw water
Fuel type: Diesel
Fuel capacity: 400l
Cruising speed: 5 knots
Max speed: 8 knots
Range: 100 hours
Transmission: Hydraulic gearbox
Propellor: Kiwi Prop 4 blade
Build:
Hull material: Glass composite with balsa core
Facilities:
Entertainment: Car radio with interior and exterior speakers
Domestic
Water capacity: 600 Litres
Water System: Fresh water pump to galley and heads 200l/hr water desalinator
Accommodation: Aft master ensuite forward double V-berth separate cabin with two full-length bunk beds
Head: One aft in master suite; one forward
Showers: One each in master suite and forward hea
Galley
Fridge: Yes
Freezer: Yes
Equipment: 4 burner stove and oven
Communications
Communications: 2 x VHF radios including DSC radio
Navigation, Electronics and Electrics
AIS transceiver; Garmin 750s touchscreen chartplotter with NZ and Oz charts installed; Raymarine autopilot; Bow-thruster; SuperWind wind generator
Sailing
Sailing instruments: Garmin Chartplotter with fully integrated wind instruments
Sails: 1 x main in stackpack; Roller furled 130% genoa; custom cut cutter sail; storm sail; Assymetrical in sleeve
Rig: 3-spreader mast; stainless pressed shrouds and stays; running backstays; running forestay to carry the cutter sail
Winches: 0.3 x 58 2 x 48
Ground Tackle and Anchors
Ground Tackle: 65kg Bruce; 45kg Quickset; 35kg CQR; 50m x 10mm galvanized chain; 3 x 40m rode
Anchor winch or capstan: Windlass
Safety Equipment
8 man liferaft 4 x custom made life harness 6 x life jackets All flares etc. required for off-shore clearance EPIRB
Tender
Two part dinghy with oars
The details of all vessels are offered in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Any buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to sale, price change, location or withdrawal without notice.