Hallberg-Rassy 94 Kutter

Main

Appendages
Keel : full keel
Category
Motorsailer
Construction
GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich foam fiberglass polyester
Country
Sweden
First built hull
1981
Helm
Single tiller (helm wheel in option)
Hull type
Monohull
Last built hull
1994
Model
Hallberg-Rassy 94 Kutter
Number of hulls built
195
Rudder
Single rudder on skeg
Sailboat builder
Hallberg-Rassy
Sailboat designer
Olle EnderleinChristoph Rassy
Standard public price ex. VAT (indicative only)
N/A €
Trailerable
No
Unsinkable
No

Dimensions

Ballast Type
Iron
Ballast type
Steel incapsulated in deep GRP bilge
Ballast weight
1800.0
Beam
3.25
Displacement
5200.0
Draft
1.15
Hull length
9.4
Light displacement (MLC)
5200.0
Mast height from DWL
11.22
Max Draft
1.15
Overall length
9.4
Waterline length
8.56

Sails

Genoa area
19.0
Mainsail area
15.0
Mast configuration
Deck stepped mast
Number of levels of spreaders
1
Rigging type
Sloop Marconi masthead
Rotating spars
No
Spars construction
Aluminum spars
Spreaders angle
0 °
Standing rigging
1x19 strand wire continuous
Total area
32.98
Upwind sail area
34.0

Engine

Engine(s)
1 inboard engine
Engine(s) power
43.0
Engines amount
1
Fuel tank capacity
150.0
Fuel type
Diesel
Make
Volvo Penta

Performance

Ballast ratio
35.0
Capsize Screening Formula
1.89
Comfort Ratio
26.2
Critical hull speed
7.1
Displacement-length ratio (DLR)
168.66
Upwind sail area to displacement
11.33

Accomodation

Berth(s)
2
Berth(s) max
4
Cabin(s)
1
Cockpit
Closed aft cockpit
Freshwater tank capacity
150
Fridge/ice-box capacity
70.0
Head(s)
1

Saloon

Berth length
2.0
Saloon table width
1.0

Fore_cabin

Berth length
2.0

Aft_cabin

The Hallberg-Rassy 94 Kutter is a sailing yacht produced by the Swedish boat manufacturer Hallberg-Rassy. It is a classic, sturdy, and well-built boat that offers both comfort and performance for cruising.

Here are some key features and characteristics of the Hallberg-Rassy 94 Kutter:

1. Design: The boat was designed by the renowned naval architect Olle Enderlein. It has a traditional design with a long keel, a moderate beam, and a canoe stern. The design ensures stability, seaworthiness, and good sailing performance.

2. Construction: The hull is made of solid fiberglass, which provides strength and durability. The deck and superstructure are also made of fiberglass, ensuring a low-maintenance exterior.

3. Interior: The interior of the Hallberg-Rassy 94 Kutter is known for its high-quality craftsmanship and attention to detail. It offers a comfortable and practical layout with ample storage space. The boat typically accommodates up to six people in two cabins.

4. Sailing Performance: The Hallberg-Rassy 94 Kutter is designed for both coastal cruising and offshore passages. It has a cutter rig with a furling genoa and a self-tacking jib, which makes it easy to handle and maneuver. The long keel and moderate sail area contribute to its stability and good upwind performance.

5. Safety: The boat is built to high safety standards, with features such as a deep cockpit, high bulwarks, and sturdy handrails. It also has a well-protected helm station, providing good visibility and control.

6. Engine: The Hallberg-Rassy 94 Kutter is typically equipped with a reliable diesel engine, providing sufficient power for motoring when needed.

7. Comfort and Amenities: The boat offers a comfortable and well-appointed interior with amenities such as a galley, a saloon, a navigation station, and a head compartment. It also has a spacious cockpit with ample seating and a folding table for outdoor dining and relaxation.

Overall, the Hallberg-Rassy 94 Kutter is a popular choice among sailors who value traditional design, solid construction, and comfortable cruising capabilities. It is a versatile yacht suitable for both short coastal trips and long-distance voyages.

Report error

$

currency selector