Kelt 7.60

Main

Appendages
Centerboard : pivoting centerboard in the keel
Category
Cruising sailboat
Construction
GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich balsa fiberglass polyester
Country
France
First built hull
1979
Former French navigation category
3
Helm
Single tiller
Hull type
Monohull
Last built hull
1985
Model
Kelt 7.60
Number of hulls built
489
Rudder
Single transom hung rudder
Sailboat builder
Kelt
Sailboat designer
Jean Berret
Standard public price ex. VAT (indicative only)
N/A €
Trailerable
No
Unsinkable
No
Version
Keel and centerboard

Dimensions

Ballast type
Cast iron exterior ballast with steel centerboard
Ballast weight
780.0
Beam
2.78
Displacement
1900.0
Draft
1.65
Draft when appendages up
0.81
Fore freeboard
0.99
French customs tonnage
5.54 Tx
Hull length
7.58
Light displacement (MLC)
2200.0
Mast height from DWL
9.9
Max Draft
1.6
Maximum displacement (MLDC)
2630.0
Mid-ship freeboard
0.91
Overall length
8.3
Waterline beam
2.3
Waterline length
6.7

Sails

Downwind sail area
64.15
E
2.8
Est. Forestay Length
9.78
Fore area
14.37
Genoa area
25.7
I
9.28
J
3.1
Jib area
8.4
Mainsail area
12.15
Mast configuration
Deck stepped mast
Number of levels of spreaders
1
P
7.84
Rigging type
Sloop Marconi masthead
Rotating spars
No
Solent area
18.7
Spars construction
Aluminum spars
Spreaders angle
0 °
Standing rigging
1x19 strand wire continuous
Symmetric spinnaker area
52.0
Total area
25.36
Upwind sail area
37.85

Engine

Engine(s)
1 outboard or inboard engine
Engine(s) power
4.0
Engine(s) power peak
10.0
Fuel type
Gas

Performance

Ballast ratio
35.0
Capsize Screening Formula
2.35
Comfort Ratio
14.67
Critical hull speed
6.28
Displacement-length ratio (DLR)
207.0
Downwind sail area to displacement
37.92
HN (French rating)
9.0
IOR rating
20.1
Maximum transverse section
0.78
Upwind sail area to displacement
22.38
Wetted area
14.31

Accomodation

Berth(s)
4
Berth(s) max
5
Cabin(s)
1
Cockpit
Closed aft cockpit
Freshwater tank capacity
100
Galley headroom
1.73
Head(s)
1
Maximum headroom
1.82

Saloon

Berth length
2.0
Berth width
0.67
Maximum headroom
1.73

Fore_cabin

Berth length
2.15
Berth width
1.75
Maximum headroom
1.54

Aft_cabin

The Kelt 7.60 is a popular sailing boat that was manufactured by the French company Kelt Marine in the 1970s and 1980s. It is a small to medium-sized cruiser-racer sailboat that offers a good balance between performance and comfort.

The Kelt 7.60 has a length overall (LOA) of 7.60 meters (24.9 feet) and a beam of 2.80 meters (9.2 feet). It has a moderate displacement of around 2,000 kilograms (4,409 pounds), which allows for decent stability and handling in various weather conditions.

One of the notable features of the Kelt 7.60 is its spacious and well-designed interior. It can comfortably accommodate up to six people with its two cabins, a saloon, and a small galley. The saloon has a foldable table that can be converted into an additional berth if needed. The boat also has a separate head compartment with a marine toilet and a sink.

In terms of sailing performance, the Kelt 7.60 is known for its good upwind capabilities and overall maneuverability. It has a fractional sloop rig with a mainsail and a genoa, which can be easily handled by a small crew. The boat's deep fin keel provides stability and helps in maintaining a good course even in rougher seas.

The Kelt 7.60 is often praised for its solid construction and durability. It is built with a fiberglass hull and deck, which makes it relatively low-maintenance and resistant to osmosis. The boat's design also incorporates a large cockpit with comfortable seating and easy access to the deck.

Overall, the Kelt 7.60 is a well-regarded sailing boat that offers a good combination of performance, comfort, and affordability. It is suitable for both cruising and club racing, making it a popular choice among sailing enthusiasts.

Report error

$

currency selector